search
for
 About Bioline  All Journals  Testimonials  Membership  News


Ciência Florestal
Centro de Pesquisas Florestais - CEPEF, Departamento de Ciências Florestais - DCFL, Programa de Pós Graduação em Engenharia Florestal - PPGEF
ISSN: 0103-9954
EISSN: 0103-9954
Vol. 16, No. 3, 2006, pp. 343-351
Bioline Code: cf06030
Full paper language: Portuguese
Document type: Research Article
Document available free of charge

Ciência Florestal, Vol. 16, No. 3, 2006, pp. 343-351

 pt MODELAGEM DE MISTURAS NA FABRICAÇÃO DE COMPÓSITOS POLÍMERO-FIBRA, UTILIZANDO POLIETILENO E SERRAGEM DE Pinus check for this species in other resources sp.
Hillig, Éverton; Freire, Estevão; Carvalho, Gláucio A.; Schneider, Vania Elisabete & Pocai, Karla

Resumo

Neste trabalho, foi estudado o efeito da composição de diferentes misturas de polietileno de alta densidade (HDPE) virgem, HDPE reciclado e serragem de Pinus check for this species in other resources sp., nas propriedades físico-mecânicas de placas confeccionadas pelo processo de compressão. As misturas foram homogeneizadas em um misturador tipo Drais, sem controle de temperatura e moldadas por compressão em prensa hidráulica a 150°C. Partindo das placas, foram confeccionados corpos-de-prova para ensaios de tração, flexão, impacto e dureza, segundo normas ASTM, e também foram determinadas as densidades médias das placas. A modelagem estatística foi realizada segundo o planejamento centróide simplex, utilizando sete misturas dos trés componentes e trés repetições de cada mistura. Os resultados mostraram que a resisténcia à tração, a resisténcia à flexão, a dureza e a densidade das placas, são explicadas pelo modelo linear, enquanto a resisténcia ao impacto é explicada pelo modelo quadrático. Não houve diferença significativa nas propriedades físico-mecânicas dos compósitos confeccionados com HDPE virgem, daqueles confeccionados com HDPE reciclado, exceto para resisténcia ao impacto, no qual o HDPE virgem apresentou maiores valores.

Palavras-chave
compósitos; polietileno; serragem.

 
 en MODELLING OF COMPOSITIONS BASED ON WOOD-FIBER USING POLYETHYLENE AND Pinus check for this species in other resources sp. SAWDUST
Hillig, Éverton; Freire, Estevão; Carvalho, Gláucio A.; Schneider, Vania Elisabete & Pocai, Karla

Abstract

In this work, the effect of different compositions of virgin and recycled high density polyethylene/ Pinus check for this species in other resources sp. on physical-mechanical properties of sheets made by compression molding was studied. The compositions were blended in a thermokinetic mixer (Draiss) and compression molded at 150°C. ASTM samples for tensile, flexural, impact and hardness tests were taken from the sheets. The density of the sheets were determined. The statistical model used was a centroid simplex with seven compositions and three repetitions. Results showed that tensile and flexural strength as well as hardness and density followed a linear model, while impact strength is explained by a quadratic model. Physical-mechanical properties of compositions using virgin and recycled HDPE did not show significative changes, except for impact strength, when virgin HDPE showed higher numerical results.

Keywords
composites; polyethylene; sawdust.

 
© Copyright 2006 - Ciência Florestal
Alternative site location: http://cascavel.ufsm.br/revistas/ojs-2.2.2/index.php/cienciaflorestal/index

Home Faq Resources Email Bioline
© Bioline International, 1989 - 2024, Site last up-dated on 01-Sep-2022.
Site created and maintained by the Reference Center on Environmental Information, CRIA, Brazil
System hosted by the Google Cloud Platform, GCP, Brazil