search
for
 About Bioline  All Journals  Testimonials  Membership  News


Indian Journal of Dermatology, Venereology and Leprology
Medknow Publications on behalf of The Indian Association of Dermatologists, Venereologists and Leprologists (IADVL)
ISSN: 0378-6323 EISSN: 0973-3922
Vol. 74, Num. 4, 2008, pp. 392-393

Indian Journal of Dermatology, Venereology and Leprology, Vol. 74, No. 4, July-August, 2008, pp. 392-393

Letter To Editor

Using a microdermabrasion machine as a suction blister device

Department of Dermatology, Amrita Institute of Medical Sciences, Kochi, Kerala
Correspondence Address:Department of Dermatology, Amrita Institute of Medical Sciences, Kochi, Kerala - 682026
ferozkal@hotmail.com

Code Number: dv08170

Sir,

Epidermal grafts obtained from suction blisters have been proven alternatives in stable vitiligo. There are different techniques described for creating suction blisters. All these techniques basically involve attaching suction cups or syringes to a vacuum-producing device, which in turn, can be connected to a pressure gauge for assessing the suction pressure. [1],[2] We describe a method by which the suction blister can be created using a microdermabrasion machine with a vacuum option.

We used a microdermabrasion machine having a vacuum pump (Derma peel Gold ® manufactured by Dermaindia). The other materials used included 20 cc or 50 cc syringes and three-way connectors. The microdermabrasion hand piece is removed from its attachment [Figure - 1] and the powder delivering tube (white for this machine) is occluded. The vacuum tube (blue for this machine) is attached to one end of a three-way connector and a 20 cc syringe is attached to the lower end of the three-way connector [Figure - 2]. The syringe is placed firmly onto the donor site after removing the piston and the micordermabrasion machine is switched on. The vacuum level can be adjusted to the desired level. We normally maintain a vacuum of 200-400 mm of mercury. The knob of the three-way tap is rotated to lock the suction and the blue tubing is gently removed so that the syringe stands independently due to the suction. Good blisters are obtained in an average period of two to three hours [Figure - 3].

We have used this method for the creation of blisters in six patients. The lateral aspect of the thigh was used in all patients and the forearm area was also used in one patient. The rates of adequate blister formation were around 75% (out of a total of 40 sites in all six patients, adequate blisters were obtained in at least 30 sites).

Most modern dermatology centers have microdermabrasion units and the same can be effectively utilized to harvest suction blisters for stable vitiligo or postinflammatory depigmentation. The use of the microdermabrasion machine for the creation of suction blister is unlikely to affect the life of the machine in any way, because the total time per site for creating adequate suction is very minimal. (The machine needs to be switched on only for around thirty seconds per site, after which the suction can be locked). We could not think of any drawbacks of this method compared to other available techniques of creating suction blisters. The machine gives a smooth suction and the vacuum can be easily adjusted in any range between 0 and 760 mm of Hg even after fixing the suction cup/syringe. The tubing of the machine fits snugly into the corresponding ends of the three-way tap, and creating and measuring the vacuum levels is very convenient.

References

1.Gupta S, Shroff S, Gupta S. Modified technique of suction blistering for epidermal grafting in vitiligo. Int J Dermatol 1999;38:306-9.  Back to cited text no. 1  [PUBMED]  [FULLTEXT]
2.Tawade YV, Gokhale BB, Parakh A, Bharatiya PR. Autologous Graft by Suction Blister Technique in Management of Vitiligo. Indian J Dermatol Venereol Leprol 1991;57:91-3.  Back to cited text no. 2    

Copyright 2008 - Indian Journal of Dermatology, Venereology and Leprology


The following images related to this document are available:

Photo images

[dv08170f1.jpg] [dv08170f3.jpg] [dv08170f2.jpg]
Home Faq Resources Email Bioline
© Bioline International, 1989 - 2024, Site last up-dated on 01-Sep-2022.
Site created and maintained by the Reference Center on Environmental Information, CRIA, Brazil
System hosted by the Google Cloud Platform, GCP, Brazil