 |
| About Bioline | All Journals | Testimonials | Membership | News |
|
||||||
|
||||||
Electronic Journal of Biotechnology, Vol. 9, No. 3, June, 2006, Supp. 1, 2006, pg. 221-226 RESEARCH ARTICLE Biosorption of heavy metals by Talaromyces helicus: a trained fungus for copper and biphenyl detoxification M. Cristina Romero*1 , Enso H. Reinoso2 , M. Inés Urrutia3 , Alejandro Moreno Kiernan4 1Micología
Médica e Industrial,
Posgrado en Microbiología,
Facultad de Ciencias Veterinarias,
Universidad Nacional de
Financial support: This work was supported by grants from the National Council of Scientific and Technological Research (CONICET) and from the National University of La Plata (UNLP- Facultad de Ciencias Veterinarias), Argentina. Code Number: ej06090 Abstract At present, it is common to observe environments with organic and inorganic pollution, defined as co-contamination. Most industrial and urban effluents releases both pollutant types, leading to a complex environmental problem, as the biota must be tolerant to both xenobiotics. T. helicus, an efficient strain to degrade biphenyl, was trained with high copper levels, and became co tolerant to cobalt, lead and cadmium when was cultured in their presence. The copper adaptation was the result of physiological mechanisms, and the activated biochemical processes conferred resistance to Cu2+ as well as to other heavy metals. Furthermore, the Cu2+ adaptation of the mycelium was also transferred to the spores, that removed twice as much copper from solution than those of the no trained parentals. Interestingly, metals combinations were less toxic than single ones, and co tolerance development indicated that the cellular mechanisms that conferred resistance were non-specific, so the micobiota isolated from co contaminated environments often exhibited resistance to more than one ions. These results emphasized the detoxification abilities of T. helicus and the adaptation to heavy metals and biarylic compounds. This data is significant for the environmental biotechnology, suggesting that such tolerance and co tolerance could be acquired in natural environments. So a simple bioremediation strategy could enhance the detoxification of these polluted areas, as the degrader organisms could be present. Keywords: biodegradation, biphenyl, cocontaminated sites, cotolerance, metal sorption, Talaromyces helicus.
Remediation of co-contaminated sites with organic and metallic pollutants is a complex problem, as the components must be differently treated, yet 55% of the hazardous waste sites are co-contaminated (Roane et al. 2001; Sandrin and Maier, 2003). Alternatively, the area may be capped to prevent metal-transporting, or to reduce metal-mobilization by anaerobiosis (Roane et al. 1996; Kong, 1998; Kamashwaran and Crawford, 2001), or organic matter and clay additions (Malakul et al. 1998; Jonioh et al. 1999; Neilson and Maier, 2001), or environmental pH-changes (Majumdar et al. 1999; Sandrin and Maier, 2002) that determine ions bioavailability and affect the biota (Zoumis et al. 2001). In either case, metal removal or stabilization is likely to be the first step to detoxificate co-contaminated sites (Atlas and Unterman, 1999; Liu et al. 2001), as inorganic pollutants in the ionic forms inhibit remediation through interaction with enzymes directly involved in biodegradation (e.g. specific oxygenases) or in general metabolism, by binding to the enzymes sulfhydryl-groups (Nies, 1999). Unfortunately, few studies provide information on the metal levels that decreased the biotransformation due to the wide range of reported concentrations, and to different experimental protocols ions bioavailability and toxicity (Ricart et al. 2004). Alternatively, geo-chemical modelling software predicted metal speciation as a function of pH and ionic strength, and at least three computational models were developed to assess the ions impact on organics detoxification (Jin and Bhattacharya, 1996; Nakamura and Sawada, 2000; Amor et al. 2001). Therefore, the aims of this study were to assess: a) the physiological adaptation to Cu2+ in Talaromyces helicus cultures in BP presence, b) the transference of Cu2+-tolerance from the mycelium to the spores and to confer this resistance to other heavy metals and c) to quantify the inhibitory effects of metals on the fungal transformation BP. Fungal isolation and identification T.
helicus was isolated from co-contaminated sludge of the East Channel,
near the YPF-oil Refinery,
Culture conditions and metabolites identification One-hundred
ml MM with 2% glucose was inoculated with mycelial plugs (
At
different sampling periods, 1 ml culture was centrifuged (5000 x g,
5 min), and metabolites were analyzed in 100 µl supernatant separated
from the mycelium by centrifugation during 130 hrs, the supernatants
were extracted twice with ethyl-acetate at pH 7, and once again at
pH 2. The organic phases were dried over Na2SO4,
and the solvent removed by evaporation. The obtained residues were
dissolved in methanol. The mycelium was washed twice with 5 ml methanol;
the methanolic extract was dried over Na2SO4 and the solvent reduced to 1 ml by evaporation. The three extracts
were analyzed by RF-HPLC (Hammer and Schauer, 1997).
The UV-visible absorption spectra of the degradation products were
determined in a diode array detector HP 1040 (Hewlett Packard,
T. helicus grew on MM-BP and was trained to increasing Cu2+ -levels by serial transfer every 3 days to medium with 200, 300, 400, 500 and 600 ppm Cu2+. The media were adjusted to pH 5, as metals occurs as divalent cations at this pH. Not-exposed strains grew on the same medium without Cu2+ (non-trained strain), all the assays were done by triplicate. Then,
a second assay were performed, and non- and Cu2+ -training
biotypes (plugs:
To determine if the Cu2+ -resistant of the mycelia could be transferred to their spores, one sporangium from non- and Cu-trained fungus were suspended in distilled water and agitated to release the spores. The spore suspensions were serially diluted in distilled water, and the spores from no training biotypes were plated on agar-medium without Cu2+, and those from Cu2+-adapted strain on 50 ppm Cu2+, a no inhibitory levels. After
incubation at
Three replicates were done for each assay and metal concentrations, data are expressed as arithmetic mean ± standard error. The Student's two-tailed t-test was used to evaluate the differences between non-trained and trained experimental means, with P < 0.5 being considered significant. In the single-spore cultures, the variation coefficients were determined to assess the variability degree among spores isolated from a common sporangium. |
The ascomycete Talaromyces helicus was isolated within a number of yeast and filamentous fungi from co-contaminated sludge (Romero et al. 2001, Romero et al. 2002). Although, T. helicus did not use biarylics like BP or DBF for growth, the fungus was able to co-metabolized these compounds. Three product types were formed, such as hydroxylated products in high amounts, more hydrophilic sugar-conjugates as well as a ring-cleavage product in lower amounts (Romero et al. 2005). This isolated T. helicus accumulated 6 BP-derivatives; in contrast, four of six other Talaromyces strains studied produced 4-hydroxy-BP as the only metabolite. Therefore, this strain was selected to develop copper and other heavy metals tolerance.
The growth rates of non- and trained fungus were initially inhibited at 150 ppm, being the no treated strains more sensitive. With 400 ppm Cu2+, the no training biotypes did not develop, whereas the treated ones exhibited growth even at 600 ppm Cu2+ (Figure 1).
Further
assays evaluated the sensitivity of both T. helicus cultures
to Co2+, Pb2+ and Cd2+, being the
treated biotypes more tolerant to the heavy metals than the no trained
parentals (Figure 2). No trained T. helicus cultures exhibited slight development with 350 ppm Cd, whereas some
growth occurred in Cu-treated strains with 600 ppm Cd. In the cobalt
assays, the no treated biotypes grew till 100 ppm Co; while the treated
strains were tolerant to 200 ppm
The hyphae from single-spore plates of Cu-trained T. helicus grew better on Cu-amended media, and the variation coefficients of the hyphae growth obtained from single-spore of the same sporangium of non- and Cu-trained fungus were significantly different. Furthermore, trained mycelia removed twice as much Cu from solution than those of the no trained parentals, and the amount of Cu-removed by both cultures were correlated with the Cu-solution levels (Table 1).
Table 1. Copper
removed by non- and trained T. helicus at different Cu levels. |
Cu added |
Cu removed (%, respect to added Cu) |
|
(ppm) |
non trained strains |
Cu-trained strains |
200 |
4.7 |
8.9 |
300 |
9.4 |
17.9 |
400 |
9.8 |
28.0 |
500 |
8.5 |
39.5 |
600 |
7.5 |
52.0 |
The comparative toxicity of the studied metals to non- and trained T. helicus followed the sequence Co2+ > Cd2+ > Cu2+ > Pb2+, but their relative toxicities were independent of the ion sizes and membrane penetration, as their no hydrated ionic radii were 0.069, 0.072, 0.114 and 0.072, respectively (Atlas and Unterman, 1999). Therefore, other mechanisms were acquired by the fungus, as a variety of interactions between fungi and ions had been proposed (Ariff et al. 1999; Pascoal and Cássio, 2004).
This fungus produced large amounts of BP-metabolites, hydroxylated ones, sugar conjugates and a cleavage product, similarly to Penicillium canescens (Hammer et al. 2001), Debaryomyces vanrijiae (Lange et al. 1998), Paecilomyces lilacinus (Gesell et al. 2001) and Trichosporon strains (Sietmann et al. 2002). This conspicuous potential was considered to select the strain for further assays.
The Cu-adaptation and the co-tolerance to other heavy metals in T. helicus is a remarkable data, as biosorption of other ions but not co-tolerance had been reported among filamentous fungi (Yan and Viraraghavan, 2000; Borghouts et al. 2001; Massaccesi et al. 2002). A noteworthy result was also the mycelia responses from Cu-trained spores derived from the same sporangium that tolerated higher copper levels.
The impact of metals on wild soil communities had been examined on phenanthrene (Maslin and Maier, 2000), naphthalene (Sandrin et al. 2000) and phenol biotransformation (Nakamura and Sawada, 2000). These studies pointed out those metals affected adversely to no degrading members of the consortium that play a vital but indirect role in the biodegradation processes.
Some studies investigated the impact of various metals on the bioremediation of a single organic compound. Interestingly, metals combinations were less toxic than single ones, and co tolerance development indicated that the cellular mechanisms that conferred resistance were non-specific, so the microbiota isolated from co-contaminated environments could exhibited resistance to more than one ions, consequently co-tolerance may be a common natural response (Gadd and Sayer, 2000; Amor et al. 2001).
The mechanisms by which metals inhibit the biodegradation vary with the composition and complexity of the system under study and include both physiological and ecological components.
In conclusion, the T. helicus resistance to heavy metals suggested that the co-tolerance and efficient biarilic transformation were acquired in nature. The issue of co-contamination is a serious one, therefore, the training of fungal strains to degradate both pollutants are a valuable environmental technology for the detoxification of co-contaminated habitats, by bioaugmentation strategy (Roane et al. 2001).
Note: Electronic Journal of Biotechnology is not responsible if on-line references cited on manuscripts are not available any more after the date of publication.
Supported by UNESCO / MIRCEN network
© 2006 by Pontificia Universidad Católica de Valparaíso -- Chile
| |||||||||
