|
Ciência Florestal
Centro de Pesquisas Florestais - CEPEF, Departamento de Ciências Florestais - DCFL, Programa de Pós Graduação em Engenharia Florestal - PPGEF
ISSN: 0103-9954 EISSN: 0103-9954
Vol. 28, No. 2, 2018, pp. 746-757
|
Bioline Code: cf18069
Full paper language: Portuguese
Document type: Research Article
Document available free of charge
|
|
Ciência Florestal, Vol. 28, No. 2, 2018, pp. 746-757
en |
USE OF Bambusa tuldoides AND Eucalyptus grandis FOR MANUFACTURING PARTICLEBOARDS
Morais, Weslley Wilker Corrêa; Haselein, Clovis Roberto; Susin, Felipe; Vivian, Magnos Alan & Souza, Joel Telles de
Abstract
The bamboo panels particleboards can be advantageous when produced with a mixture of some kinds
of wood. However, there are few studies using Bambusa tuldoides for the production of homogeneous
particleboards or in combination with wood particles. Therefore, the aim of this study was to evaluate
the physical-mechanical quality of particleboard made of different percentages of Bambusa tuldoides and
Eucalyptus grandis. To do so, 36 panels were produced composed of a mixture of 0, 25, 50, 75 and 100%
of dry matter. The tests realized were moisture, mass density, swelling thickness and water absorption.
The mechanical tests were bending, internal bond and screw withdrawal (ASTM 1037, 1999). The results
submitted to the correlation test and analyzed by regression. The panels did not get the minimum values
of the standards (ANSI A 208.1, 1987) for mechanical tests. It is concluded that the homogeneous bamboo
panels obtained superior performance in physical tests than the eucalyptus panels, which are usually used
in the industrial sector. However, the insertion of bamboo particles impaired the performance of the panels
in the mechanical tests.
Keywords
bamboo; urea formaldehyde; physical-mechanical tests; ASTM 1037
|
|
pt |
USO DE Bambusa tuldoides E Eucalyptus grandis PARA CONFECÇÃO DE PAINÉIS AGLOMERADOS
Morais, Weslley Wilker Corrêa; Haselein, Clovis Roberto; Susin, Felipe; Vivian, Magnos Alan & Souza, Joel Telles de
Resumo
Painéis formados de bambu podem ser vantajosos quando produzidos com mix de algum tipo de madeira.
No entanto, são escassos os estudos utilizando a espécie Bambusa tuldoides que visem produzir painéis
uniformes ou combinados com eucalipto. Portanto, o objetivo deste estudo foi avaliar os atributos físicomecânicos
dos painéis confeccionados por distintas percentagens de Bambusa tuldoides e Eucalyptus
grandis. Foram produzidos 36 painéis constituídos pela mistura de 0, 25, 50, 75 e 100% (massa seca). Os
testes físicos foram umidade das amostras, massa específica, absorção água e o inchamento da espessura.
Os testes mecânicos foram extração de parafuso, flexão e tração (ASTM 1037, 1999). Os resultados foram
analisados por correlação e regressão. Os painéis apresentaram características mecânicas inferiores aos
desempenhos mínimos estipulados pela norma. Conclui-se que painéis uniformes de bambu resultaram
desempenho superior nos testes físicos aos do eucalipto, que normalmente são utilizados no setor industrial,
entretanto, ao aumentar a quantidade de bambu reduziu-se o desempenho nos testes mecânicos.
Palavras-chave
bambu; ureia-formaldeído; testes físico-mecânicos; ASTM 1037
|
|
© Copyright [2018] - Ciência Florestal Alternative site location: http://cascavel.ufsm.br/revistas/ojs-2.2.2/index.php/cienciaflorestal/index
|
|